All posts by Mathew Sylvia

About Mathew Sylvia

The site is coming along good so far!

28May/16

How to build a SmokeStopper

Save your electronics, build a SmokeStopper! —————————————————————————————————————– We’ve all been there… Working all day on a new build, you finally finish, you give your new beast one final look-over and don’t seeRead More…

28May/16

KISS FCv1 Lifted Pads Workarounds

Lifted PWM pads are common, and the majority of the time caused by excessive heat to the pad when soldering, or too much force applied to the soldered item causing the padRead More…

04May/16

Using the KISS GUI

The KISS GUI is a Chrome Application and it was designed like the rest of the KISS Flight Controller…to be super simple. This allows the pilot to be spending less time configuringRead More…

30Apr/16

KISS OSD

The KISS OSD, Based off the Micro MinimOSD This incredibly small ATMEGA328/ MAX7456 OSD  is based on the MinimOSD, but without the voltage regulator of the older MinimOSD. This unit can takeRead More…

30Apr/16

KISS PDB 24a ESC Carrier

The KISS Carrier Board  This item allows a super clean and compact build of the power supply and flight controller wiring. 4 KISS 24a RE ESCs can be mounted directly on the PDB. TheRead More…

30Apr/16

How to flash the KISS Flight Controller (MAC)

Flashing the KISS FC on a Mac Great Tutorial by Philipp Seidel: http://blog.seidel-philipp.de/flyduino-kiss-fc-firmware-update-mac-osx-english/ You don’t have to mess around with Windows if you’re more comfortable on the Mac. Do it from theRead More…

30Apr/16

How to flash the KISS Flight Controller (PC)

KISS FC Firmware Update Instructions Great tutorial by Philipp Seidel: http://blog.seidel-philipp.de/flyduino-kiss-fc-firmware-update-windows-english/ Step 1: Close the Boot jumper: (v1.01 & v1.2 Boards) on the KISS FC with a solder bridge or a wire. HoldRead More…