How to build a SmokeStopper

Save your electronics, build a SmokeStopper! —————————————————————————————————————– We’ve all been there… Working all day on a new build, you finally finish, you give your new beast one final look-over and don’t seeRead More…

KISS FCv1 Lifted Pads Workarounds

Lifted PWM pads are common, and the majority of the time caused by excessive heat to the pad when soldering, or too much force applied to the soldered item causing the padRead More…

KISS OSD

The KISS OSD, Based off the Micro MinimOSD This incredibly small ATMEGA328/ MAX7456 OSD  is based on the MinimOSD, but without the voltage regulator of the older MinimOSD. This unit can takeRead More…

KISS Flight Controller Oscillations

Oscillations Oscillations can be a very broad topic. Generally speaking, you should not experience oscillations with default PIDs. The multirotor frame and props can be a large factor in creating vibrations at differentRead More…

How to flash the 24a Race Edition ESC

Flashing the KISS ESC 24A Connect the USB-UART to one ESC (RX-TX TX-RX and GND-GND) Unmount all propellers! Connect the USB- UART to your computer and then power the ESC. Wait 5secondsRead More…

Is there a tool to help setup rates?

Are you trying to setup rates on your flight controller but need assistance? Click on this link to use the Rate Tool!               Rates also beRead More…