Setting up a logical Switch for mAh Consumption on a Taranis
Screenshots of exemplary settings to gain info of mAh comsumption on an FrSky Taranis X9 in the telemetry screens and set up thresholds for certain warnings.
Setting a Dead Band on the Taranis
Instructions by JimmyRigged Go to the curves page on your Taranis and click cv1 (or the next free one if you have a curve already set) once you are in cv1, giveRead More…
Air Mode and Idle up Switch
Air Mode (image for reference) The PID controller won’t shut off as long as the input throttle is higher than Min. Command. If Min. Command is set to 1000 andRead More…